“Waah Waah its expensive”

  • bumpusoot [any]@hexbear.net
    link
    fedilink
    English
    arrow-up
    54
    ·
    2 months ago

    I’m all for it as an idea, but “meltdown-proof” really makes me think of “unsinkable”. It’s quite a hubristic description just begging to be proven wrong.

    • alcoholicorn
      link
      fedilink
      English
      arrow-up
      47
      arrow-down
      1
      ·
      edit-2
      2 months ago

      To test this, which became commercially operational in December 2023, Dong and his team switched off both modules of HTR-PM as they were operating at full power, then measured and tracked how the temperature of different parts of the plant went down afterwards. They found that HTR-PM naturally cooled and reached a stable temperature within 35 hours after the power was removed.

      I mean if you drove the titanic through an iceberg and it was fine, I’d say you’d have a iceberg-proof ship, since you’ve literally proved it against an iceberg.

      They proved that this power plant doesn’t melt down when its cooling power supply is removed

      • booty [he/him]@hexbear.net
        link
        fedilink
        English
        arrow-up
        40
        arrow-down
        1
        ·
        2 months ago

        I mean if you drove the titanic through an iceberg and it was fine, I’d say you’d have a iceberg-proof ship

        And you would be wrong, because the Titanic could’ve plowed directly into the iceberg and it wouldn’t have sunk. They weren’t calling it unsinkable for no reason. The circumstances that led to the Titanic sinking were very difficult to foresee, just like the circumstances which might potentially cause a meltdown in a “meltdown-proof” reactor.

        I think the tech itself is great I just think this language is in poor taste

      • morrowind
        link
        fedilink
        English
        arrow-up
        16
        ·
        2 months ago

        I’m sure the Titanic was also unsinkable for a regular breach.

        Now what happens if somebody drops a bomb on the plant

        • alcoholicorn
          link
          fedilink
          English
          arrow-up
          11
          ·
          2 months ago

          I do kinda wonder what happens if they lose coolant.

          Helium has such a low heat capacity, it has to be at a fairly high pressure (70 bar in this case) and flow really fast. It’s mitigated to some extent by the low density and size of the reactor, as demonstrated by the passive flow being sufficient to cool it.

          Also IIRC these fuel pebbles themselves become less reactive as they get hotter and they can get very hot before melting down

        • Nacarbac [any]@hexbear.net
          link
          fedilink
          English
          arrow-up
          10
          ·
          2 months ago

          Well, they do tend to be designed to be resistant to that kind of thing - and some sorta fancy bunker buster would probably disperse the fissile material anyway. Certainly a big ol’ not good, but criticality depends on having enough mass in close proximity, so it’s similar to how you can blow up a nuclear missile with an interceptor safely-ish.

          Setting an oil facility ablaze is going to be much easier and have worse health effects in the vicinity.

      • bumpusoot [any]@hexbear.net
        link
        fedilink
        English
        arrow-up
        3
        ·
        edit-2
        2 months ago

        This is just foolish reasoning, everything is immune to failure until it isn’t.

        Basically every major accident in history (including Chernobyl) happened because of circumstances that were either not imagined or deemed so unlikely they’d never happen. Effectively calling your thing failure-proof is just stupid.

    • SpoopyKing@lemmy.sdf.org
      link
      fedilink
      English
      arrow-up
      2
      ·
      2 months ago

      One of the risks is the fuel getting jammed. Since they’re spheres, they should have very low friction. But they already saw that defects in the coating can raise that risk. They would need very strict QC on manufacturing the pellets, and the entire system must be designed to mitigate the chance of wear causing damage. There would naturally be a buildup of debris over time, but fine carbon dust usually serves as a lubricant anyway. They would need to prevent contaminants entering the core.

      Even if there was a jam, is there a foolproof way to stop the input, even during a power failure? Can the pellets sit in the reactor forever without getting too hot when the cooling is down?

      Is any of this human controlled? Part of Chernobyl was someone ignoring a failure and choosing not to shut down until it was too late - is that a possibility here?

      So yeah, saying failure is impossible is literally what they said with the Chernobyl-style reactors when they were new. They did safety tests on those to see what would happen if the power failed, which was itself the catalyst for the failure. Just say that you have a new, extremely safe design, be open about how it works, and don’t tempt fate?

  • barrbaric [he/him]@hexbear.net
    link
    fedilink
    English
    arrow-up
    45
    ·
    2 months ago

    I don’t even know that it is expensive, it’s just that nobody’s building nuclear plants but China, which means if there’s new tech in the field it’s going to debut there.

  • Egon [they/them]@hexbear.net
    link
    fedilink
    English
    arrow-up
    30
    arrow-down
    1
    ·
    2 months ago

    slaps the side of the titanic
    “This bad boy can handle SO MANY catastrophic failures. It’s unsinkable!”

    • volcel_olive_oil [he/him]@hexbear.net
      link
      fedilink
      English
      arrow-up
      17
      ·
      2 months ago

      alternate history comedy movie where the Titanic faces more and more ludicrous disasters on it’s journey, finally arriving in New York looking like an absolute wreck but still floating

      • PolandIsAStateOfMind@lemmygrad.ml
        link
        fedilink
        English
        arrow-up
        10
        ·
        edit-2
        2 months ago

        Real reason of sinking was that moonshine apparature exploded in cargo hold but they weren’t insured from this, so they lied about it.

  • Awoo [she/her]@hexbear.net
    link
    fedilink
    English
    arrow-up
    27
    ·
    2 months ago

    This is interesting. So the method is to replace the rods with these graphite pebble beds and they dissipate heat differently? And that heat transfers into the air and away faster than the potential maximum heat output even under emergency?

    Everyone has a good idea of what the rod reactors look like these days, how do these pebble reactors look? I assume we’ll start seeing them in movies at some point when they become more common.

  • alcoholicorn
    link
    fedilink
    English
    arrow-up
    13
    ·
    2 months ago

    It might be a little cheaper now, since you no longer need emergency diesel generators.

  • SSJMarx@lemm.ee
    link
    fedilink
    English
    arrow-up
    9
    ·
    2 months ago

    I’m sure it’s an impressive piece of tech but damn that is a fate-tempting headline lmao

  • Deadend [he/him]@hexbear.net
    link
    fedilink
    English
    arrow-up
    7
    ·
    2 months ago

    I don’t think it’s truly proof, but it can handle some known issues better.

    But also does it now introduce NEW complex problems?

  • CyberMonkey404
    link
    fedilink
    English
    arrow-up
    6
    ·
    2 months ago

    Waah Waah its expensive

    I mean that’s basically capitalist logic, isn’t it? If it’s cheaper to risk meltdown and throw away proletariat lives, then that’s what will happen. It’s why we (humanity) must do away with commodification of everything

  • Xavienth@lemmygrad.ml
    link
    fedilink
    English
    arrow-up
    6
    ·
    2 months ago

    I mean, they already had safe meltdown reactors when they made the molten salt reactor. You just put a meltable plug at the bottom of the reactor and if it gets to hot it melts the plug and drains into a container. Thorium requires a specific setup to fission, so this stops all reaction.