Thank you! You folks just are the best!

SOLUTION: https://lemmy.ml/comment/4084707 Follow this thread!


I noticed that my webcam wasn’t working and I thought maybe it had some driver missing.

(base) bob@bob:~
$ lsusb
Bus 001 Device 002: ID 0c45:6363 Microdia USB 2.0 Camera

so I created a probe using linux-hardware.org app image and it found that I had this hardware component that wasn’t working. https://linux-hardware.org/?id=usb:0c45-6363 and it also has this in the website

Now, I searched for this exact keyword and found this driver lying around a little known guy’s repository called linux.

https://github.com/torvalds/linux/blob/master/drivers/media/usb/uvc/uvc_driver.c

Now, I don’t know how to install it. So, how do I install this?

  • wmassingham@lemmy.world
    link
    fedilink
    arrow-up
    7
    arrow-down
    1
    ·
    10 months ago

    As you noted, it’s part of the mainline linux kernel as of 2.6.26. You can verify this with modinfo uvcvideo. It will print the kernel module info. When compatible hardware is detected, it should load the module automatically, but you can check loaded modules with lsmod and load it manually with modprobe uvcvideo if necessary.

  • wildbus8979@sh.itjust.works
    link
    fedilink
    arrow-up
    5
    ·
    edit-2
    10 months ago

    It is almost certainly already installed (UVC is extremely common, and valid for almost all off the shelf webcams).

    You can verify this by running:

    find /lib/modules/$(uname -r) -type f -iname "*uvc*"
    

    If not you need to compile the kernel module. Instructions for this will vary slightly depending on your distro. Here are some instructions for Debian (and coincidentally Ubuntu): https://wiki.debian.org/ModuleAssistant

    • Subject6051OP
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      10 months ago
      $ find /lib/modules/$(uname -r) -type f -iname "*uvc*"
      /lib/modules/6.0.0-6mx-amd64/kernel/drivers/media/usb/uvc/uvcvideo.ko
      /lib/modules/6.0.0-6mx-amd64/kernel/drivers/usb/gadget/function/usb_f_uvc.ko
      

      This it? Is this not driver error then?

      edit: This made me think I needed a driver. Last virtual camera driver thing

        • Subject6051OP
          link
          fedilink
          arrow-up
          2
          ·
          10 months ago

          hey lsmod gave these results

          Module                  Size  Used by
          uvcvideo              131072  0
          videobuf2_vmalloc      20480  1 uvcvideo
          videobuf2_memops       20480  1 videobuf2_vmalloc
          videobuf2_v4l2         36864  1 uvcvideo
          videobuf2_common       73728  4 videobuf2_vmalloc,videobuf2_v4l2,uvcvideo,videobuf2_memops
          videodev              290816  3 videobuf2_v4l2,uvcvideo,videobuf2_common
          mc                     69632  4 videodev,videobuf2_v4l2,uvcvideo,videobuf2_common
          usbcore               344064  6 xhci_hcd,cdc_acm,uvcvideo,btusb,xhci_pci
          usb_common             16384  3 xhci_hcd,usbcore,uvcvideo
          

          I have listed everything which has uvc in it

          • mvirts@lemmy.world
            link
            fedilink
            arrow-up
            3
            ·
            10 months ago

            Watch dmesg when you plug it in and see if uvcvideo gets loaded. If not you may be able to add the device id to the list that uvcvideo will load for

          • db2@sopuli.xyz
            link
            fedilink
            arrow-up
            2
            ·
            10 months ago

            Now try

            sudo v4l2-ctl --list-devices

            Install the package it’s in if missing.

            • Subject6051OP
              link
              fedilink
              arrow-up
              3
              ·
              edit-2
              10 months ago

              v4l2-ctl

              hey, I slept off. it was midnight in India

              sudo v4l2-ctl --list-devices
              USB2.0 HD UVC WebCam: USB2.0 HD (usb-0000:00:14.0-3):
              	/dev/video0
              	/dev/video1
              	/dev/media0
              

              I installed v4l2-utils and did this, still no luck with the webcam

              edit:

              The virtual camera driver thing still shows nothing, but web cam is now working for discord. I thank you wholeheartedly! You made my day (this is morning now and this was the first thing I tried and it worked, it did make my day), thank you mate!!! But do tell me the reasoning behind what you did!

              • db2@sopuli.xyz
                link
                fedilink
                arrow-up
                2
                ·
                edit-2
                10 months ago

                It was troubleshooting, but it looks like the package I had you install was what was missing. The first thing in your screenshot references it so there must be something in there you needed.

                I would guess the ‘virtual camera’ has something to do with the unchecked 'advanced effects mode ’

                Glad to be of help. 😁