The Sukhoi Su-57 is a twin-engine stealth multirole fighter aircraft developed by Sukhoi. It is the product of the PAK FA (Russian: ПАК ФА, prospective aeronautical complex of front-line aviation) programme, which was initiated in 1999 as a more modern and affordable alternative to the MFI (Mikoyan Project 1.44/1.42). Sukhoi’s internal designation for the aircraft is T-50. The Su-57 is the first aircraft in Russian military service designed with stealth technology and is intended to be the basis for a family of stealth combat aircraft.

A multirole fighter capable of aerial combat as well as ground and maritime strike, the Su-57 incorporates stealth, supermaneuverability, supercruise, integrated avionics and large payload capacity. The aircraft is expected to succeed the MiG-29 and Su-27 in the Russian military service and has also been marketed for export.

After repeated delays, the first Su-57 entered service with the Russian Aerospace Forces (VKS) in December 2020.

Origins

In 1979, the Soviet Union outlined a need for next-generation fighter aircraft intended to enter service in the 1990s. The programme became the I-90 (Russian: И-90, short for: Истребитель 1990–х годов, lit. ‘Fighter of the 1990s’) and required the fighter to be “multifunctional” (i.e. multirole) by having substantial ground attack capabilities, and would eventually replace the MiG-29 and Su-27 in frontline tactical aviation service.

Though not a participant in the MFI, Sukhoi started its own programme in 1983 to develop technologies for a next-generation fighter, eventually resulting in the forward-swept wing S-32 experimental aircraft, later redesignated S-37 and then Su-47.

Due to a lack of funds after the dissolution of the Soviet Union, the MFI was repeatedly delayed and the first flight of the MiG 1.44/1.42 prototype did not occur until 2000, nine years behind schedule.

Because of Russia’s financial difficulties, the programme aimed to rein in costs by producing a single multirole fifth-generation fighter that would replace both the Su-27 and the MiG-29. Further cost-saving measures include an intended size in between that of the Su-27 and the MiG-29 and normal takeoff weight considerably smaller than the MiG MFI’s 28.6 tonnes (63,000 lb) and the Su-47’s 26.8 tonnes (59,000 lb).

In April 2002, the Ministry of Defence selected Sukhoi over Mikoyan as the winner of the PAK FA competition and the lead design bureau of the new aircraft. In addition to the merits of the proposal, Sukhoi’s experience in the 1990s was taken into account, with the successful development of various Su-27 derivatives and numerous exports ensuring its financial stability.

Design

The Su-57 is a fifth-generation multirole fighter aircraft and the first operational stealth aircraft for the Russian armed forces. In addition to stealth, the fighter emphasizes supermaneuverability in all aircraft axes, capacious internal payload bays for multirole versatility, and advanced sensor systems such as active phased-array radar as well as the integration of these systems to achieve high levels of automation

The aircraft has a wide blended wing body fuselage with two widely spaced engines and has all-moving horizontal and vertical stabilisers, with the vertical stabilisers canted for stealth; the trapezoid wings have leading edge flaps, ailerons, and flaperons. The aircraft incorporates thrust vectoring and large leading edge root extensions that shift the aerodynamic center forward, increasing static instability and maneuverability.

Designed from the outset as a multirole aircraft, the Su-57 has substantial internal payload capacity that allows the carriage of multiple large air-to-surface ordnance. Weapons are housed in two tandem main weapons bays in the large ventral volume between the widely spaced engine nacelles and smaller side bays with bulged triangular-section fairings near the wing root.

The first aircraft in Russian military service to emphasize stealth, the Su-57 employs a variety of methods to reduce its radar signature. Similar to other stealth fighters such as the F-22, the aircraft aligns the planform edges to reduce its radar cross-section (RCS); the leading and trailing edges of the wings and control surfaces and the serrated edges of skin panels are carefully angled to reduce the number of directions the radar waves can be reflected. Weapons are carried internally in weapons bays within the airframe and antennas are recessed from the surface of the skin to preserve the aircraft’s stealthy shape, while radar absorbent material (RAM) coatings absorb radar emissions and reduce the reflection back to the source.

As with other stealth fighters, the Su-57’s low observability measures are chiefly effective against super-high-frequency (between 3 and 30 GHz) radars, usually found on other aircraft. The effects of Rayleigh scattering and resonance mean that low-frequency radars, employed by weather radars and early-warning radars are more likely to detect the Su-57 due to its size.

Megathreads and spaces to hang out:

reminders:

  • 💚 You nerds can join specific comms to see posts about all sorts of topics
  • 💙 Hexbear’s algorithm prioritizes comments over upbears
  • 💜 Sorting by new you nerd
  • 🌈 If you ever want to make your own megathread, you can reserve a spot here nerd
  • 🐶 Join the unofficial Hexbear-adjacent Mastodon instance toots.matapacos.dog

Links To Resources (Aid and Theory):

Aid:

Theory:

  • 2Password2Remember [he/him]@hexbear.net
    link
    fedilink
    English
    arrow-up
    5
    ·
    2 hours ago

    real, unedited conversation i had outside the planned parenthood on my way back from the gym this morning

    white guy wearing those fashy sunglasses (you know the ones): excuse me, sir?

    me: are you one of those freaks who’s anti-abortion?

    white guy: yes

    me: you’re a nazi

    white guy: [inaudible] (i was wearing headphones so couldn’t hear his response0

    Death to America

  • Mokey2 [none/use name]@hexbear.net
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 hour ago

    i feel so disconnected from the world

    youtube comments and reddit is so alien to me but that’s the defacto accepted reality. i feel like im doing something wrong by coming here even though the worldview here makes sense to me

  • 2Password2Remember [he/him]@hexbear.net
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 hour ago

    also i have now lost 10 pounds since i started keeping track 6 weeks ago! at this rate i should be down to around 12% body fat (ie sexy as hell, ripped, irresistible) by the end of the year

    Death to America

  • SoylentSnake [he/him, they/them]@hexbear.net
    link
    fedilink
    English
    arrow-up
    1
    ·
    52 minutes ago

    chapo dot chat is full of revisionists& opportunists who need to be purged from the party (i.e. yall should intuitively know when im working saturdays and stop having social lives so i hve more megathread content to make the day go by, do better)

  • dumpster_dove [he/him]@hexbear.net
    link
    fedilink
    English
    arrow-up
    9
    ·
    5 hours ago

    Youtube: “Please sign in to confirm your age”

    I switch to a different VPN location within the same country

    Video plays

    Preaching to the choir here, but yeah, it was never about age confirmation

  • UmbraVivi [he/him, she/her]@hexbear.net
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    4 hours ago

    I wonder if people who don’t watch Vtubers can handle the pure concentrated cutesiness that is Fuwamoco

    It’s like they were grown in a lab to be aggressively adorable, they make other cutesy Vtubers look like normal people

    Edit: Seriously how can you look at them say “Kamu gapapa :D” in sync and not go “awwwwww”

  • i actually sanded the pieces to a model kit before assembly for the first time today. there were a few places i was sure i over-sanded but the parts seem to fit together perfectly regardless. the next skill i need to master is using capillary action to apply extra thin plastic cement, i saw a youtube video of a guy just holding pieces together and painting glue on the outside of the seam almost like a welding gun and was super impressed, it looked way easier than applying glue to one part at a time and rushing to put them together before it dries, and i appreciate when a modelling technique kind of resembles a real world construction technique, like using a pin vise to drill holes to attach other parts, makes me feel like a giant soviet propaganda poster industrial laborer soviet-chad . i also need to learn how to use gap fill material on all the models i have botched with lack of proper equipment/technique, or else i’ll be tempted to risk breaking them trying to dissasemble for maintenance.