I’m building a NAS for the first time on my own, so I wanted to share the story so far here.

I’m not a stranger to custom builds, in fact I don’t think I ever bought an assembled PC (not counting second hand 386 box a million years ago). But this is my first small, low power build, so it’s not perfect, I already ran into a wall (more later).

I base the build on an AsRock mini-ITX board, the CPU is included, it’s passively cooled, low power consumption but still powerful for a NAS. I’m sticking it into a Node 304 Fractal Design case. Here’s the full list of parts I got:

  • AsRock J4125-ITX board with a Celeron 4125 (4-core CPU)
  • 8GB DDR4 RAM (a Crucial kit)
  • a 500GB NVMe SSD (which I can’t use)
  • a couple of Seagate IronWolf 4TB drives
  • 90W PicoPSU and some no-name power brick
  • Fractal Design Node 304 mini-ITX case.

I planned to have an SSD for OS, these two disks for my photography and media, and then later on expand with more storage (preferably SSD, when I can afford it).

As mentioned, I messed up: the M2 slot on the motherboard is a “Key E” slot. I never bothered with these keys before, so I didn’t know that a Key E slot does not have a SATA protocol, it won’t take my SSD.

Another thing, the PicoPSU is a 20-pin power supply, and the board has a 24-pin slot. It should still be fine, the specs say that this is still okay, but I’ll have to see. According to my back-of-the-napkin calculations, 90 Watts should be enough power for the mobo and CPU, the SSD and the two spinning disks.

Anyway I’ll get a regular SATA SSD tomorrow and see how it’s shaping up. Let me know if you want me to post more on my progress/end result or if you have any questions.

  • JustNeedAUserAccount@lemmy.world
    1·
    10 months ago

    I have the same case for my SFF work pc. Its great, but the front dust grill can be a pain to clean and service.

    For the M.2 slot. I believe the E key is for WiFi modules. However, you should be able to buy an adapter for M key. Something like thisSintech M.2 (NGFF) NVME SSD to M2 A/E Key WiFi Port with 20cm Cable https://amzn.eu/d/3JG3dhO ( YMMV - I’ve never used this setup for a boot drive before, please do your research before purchasing!)

    In my opinion, I would still recommend purchasing a standard SATA ssd. If you find the nvme adapter works and you can have it as your boot drive, you could always use the SATA ssd as a cache store for the spinning rust

    • zlatko@programming.devOP
      1·
      10 months ago

      Thanks! I ordered a SATA SSD already, and I did plan to read about the E key slot later, but for now I’m good. The board has 4 SATA slots, so I will either have to have an USB OS disk or an adapter like this, but for now I’ll just go with what I know.

      Do you know what are the speeds like on that Sintech or similar adapter? I don’t really need NVMe speeds, it’s a simple OS disk, but I wouldn’t like to go down to something bellow regular SSD speeds.