SOLUTION:

The issue was - the ‘New UI’ docker image was automatically building for AMD64, but the Linux server is an ARM64/v8.

I had to add QEMU and multi-platform build commands to the docker-image.yml file (in Github Actions).

This creates an additional docker image for ARM64 machines, which loads and runs successfully.

This was discovered by manually building a docker container, and receiving the following message: WARNING: The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested

So if you get that message, you must build your docker image for the platform you are on (or multiple platforms).

** == ** == ** == ** == ** == ** == **

ORIGINAL ERROR:

THE SETUP and ERROR

  1. I made a fresh ansible install, on a fresh ubuntu 20.04 server - the Lemmy instance runs perfectly.
  2. I made a fresh fork of the 16.7 Lemmy-UI.
  3. I built a docker-image of that forked UI, and loaded it via docker-compose (here is my docker-image.yml build file ).

Now I am getting a “502 Bad Gateway - nginx” error (the site does not load).

NGINX error log shows:

connect() failed (111: Connection refused) while connecting to upstream, client: 75.222.232.212, server: ggg.com, request: "GET / HTTP/2.0", upstream: "http://0.0.0.0:15153/", host: "ggg.com"

  • Nginx config has not been modified (but here is the config anyway - ggg.conf)

  • Docker log is clean.

**

DIAGNOSIS

When I list docker containers, there is no PORT mapped to the ‘New-UI’ image container.

(However, when running the ‘default lemmy-UI’ image container, the PORT is successfully mapped to 127.0.0.1:15153->1234/tcp)

It seems I must create a new Container, using the ‘New-UI’ image, and map the PORT to 127.0.0.1:15153->1234/tcp (unless an Environment Variable can do it).

^ Now I must figure out that exact docker command. (because docker run -d -p 127.0.0.1:15153:1234 [ImageID] does not successfully create the container.)

**

Here are the Env Vars I’ve added (in various combinations/values):

  lemmy-ui:
    environment:
      - LEMMY_UI_HTTPS=true
      - LEMMY_UI_LEMMY_INTERNAL_HOST=lemmy:8536
      - LEMMY_UI_LEMMY_EXTERNAL_HOST=ggg.com
      - LEMMY_UI_DISABLE_CSP=true
      # - LEMMY_UI_LEMMY_WS_HOST=lemmy:8536
      # - LEMMY_UI_HOST=0.0.0.0:1234

here is the full docker-compose.yml (only changed Env Vars)

  • Dessalines
    MA
    1•2 years ago

    We use drone, there is a .drone.yml file in the root of both lemmy and lemmy-ui. But I don’t understand why you aren’t using the existing images, which are already built for arm.

    • PicoBlaanketOP
      1•2 years ago

      I forked the UI at 15.4, to build some new UI features.

      Next I will manually add those features to this clean fork of Lemmy-UI 16.7 (so all code is up-to-date).

      –

      If I may ask, do you recognize what this issue might be?

      These pages work:

      • Home page loads perfectly (when there are 0 posts)
      • Create a community works
      • visiting a community works (when there are 0 posts)
      • New user registration succeeds

      –

      However, I get a loading spinner and Uncaught TypeError: Cannot read properties of undefined (reading “____” ) on the following pages [in console]:

      • Create Post (reading “at”)
      • User Profile (reading “split”)
      • Settings (reading “map”)

      And if I do create a post [by using ‘default UI’, and then switching back to ‘forked UI’], then Post-List pages also give that error:

      • Community, Home (reading “split").

      –

      So my question is:

      Do you see a likely cause from that pattern?

      (Perhaps a backend/database connection - an undefined string).

      If you have an idea, I would love to know.

      –

      ENVIRONMENT:

      • Docker + NGINX logs seem to be clean.

      • I have not modified the ‘UI fork’ code.

      • I have not modified anything on the VPS - only added these Environment Variables in docker-compose.yml (in various combinations):

        environment:
   - LEMMY_UI_LEMMY_INTERNAL_HOST=lemmy:8536
   - LEMMY_UI_LEMMY_EXTERNAL_HOST=ggg.com
   - LEMMY_UI_HTTPS=true
   - LEMMY_UI_DISABLE_CSP=true
   - LEMMY_UI_HOST=0.0.0.0:1234
      • The install was done by ansible.

      –

      Thank you for your time and work. Lemmy is awesome.

      [I am learning about drone now.]

      • Dessalines
        MA
        1•2 years ago

        I can’t help you debug forks, you’re on your own there. Its almost certainly because your forked UI is using a wrong version of lemmy-js-client that works with the lemmy backend, so its missing or has incorrect fields in the request JSON.

        • PicoBlaanketOP
          1•2 years ago

          1 - I’ve completed your suggestions.

          You are correct - I had forked the ‘Main’ branch, which runs a different js-client than UI-16.7.

          So I merged 16.7 into my fork… and everything WORKS.

          Thank you - that was helpful.

          [I also set up Drone. Yes, it builds very fast.]

          **

          2 - Perhaps “LEMMY_DATABASE_URL” shows an obsolete value in the config docs:

          • It is listed as - postgres://lemmy:pw@LEMMY_DB:5432/lemmy
          • And perhaps should be - postgres://lemmy:pw@POSTGRES:5432/lemmy

          That 2nd string worked for me anyway - on an ansible install. (the former gives a 404 fetch error).

          **

          Thank you very much again.

          Lemmy is running smooth and looking great.

          I hope you are doing alright.