• schmidtster@lemmy.world
    link
    fedilink
    English
    arrow-up
    19
    arrow-down
    13
    ·
    edit-2
    1 year ago

    That’s unacceptable, this is a manufacturer defect and is no way caused by faulty inflation, which isn’t a thing. If it breaks, it was defective, simple as that.

    If you need to do this and this so it doesn’t break, find a better brand.

    • uniqueid198x@lemmy.dbzer0.com
      link
      fedilink
      arrow-up
      19
      ·
      1 year ago

      Its quite possible to have a pinch in the tube which will fail during inflation. In my experience, thats all brands; a tube simply can’t withstand 100 psi at a pinch point. This failure is not that, however. This is almost certainly a manufacturing defect, as metioned.

      • 𝒍𝒆𝒎𝒂𝒏𝒏@lemmy.one
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        a tube simply can’t withstand 100 psi at a pinch point

        That explains why I kept getting punctures on my old tubes at 90psi 😮 must’ve been fitting them in a dodgy way after previous repairs

        • schmidtster@lemmy.world
          link
          fedilink
          English
          arrow-up
          6
          ·
          edit-2
          1 year ago

          Or as you said, old tubes. Lots of factors, but a good tube will work a fold out unless it’s literally pinched between the rubber and rim.

          • sugar_in_your_tea@sh.itjust.works
            link
            fedilink
            arrow-up
            1
            arrow-down
            1
            ·
            1 year ago

            I recently patched my tube, and when I inflated it to 40 psi or so, I could hear popping in the tire from the pinches working their way out. And this is despite being careful by preinflating it before putting the tire back on.

            I’ve had the same with new tubes as well. Just be careful when inflating your tube after installing the tire. This particular tear probably could’ve been avoided by preinflating the tube.

      • schmidtster@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        A fold will work itself out, if you pinched it between the rubber or rim, nothing you could do would prevent it from rupturing other than reinstalling it correctly.