Hi Guys. Currently, my Raspberry Pi 4 is only running Home Assistant OS, which works quite well. In the last few weeks, I have grown more and more interested in paperless ngx and Nextcloud. Do you think my pi would be able to handle home automation and some light document management simultaneously? If so, should I install a fresh version of Raspbian or let HA-OS handle the Docker containers?

Thanks for your answers, and have a wonderful day :)

  • drugo@lemmy.drugo.me
    link
    fedilink
    English
    arrow-up
    12
    ·
    1 year ago

    It’s probably going to be ok to scope them out and experiment a bit, but I doubt you’ll get enough performance and stability to run it as production. Paperless’ OCR is quite heavy on the CPU - iirc you can disable it but then you lose half of what makes it useful, and Nextcloud also does some processing to files that are uploaded to it. Since you are not running pi-hole or other latency-sensitive services it will probably be fine, it will just get sluggish while it processes uploads.

    • Atemu
      link
      fedilink
      English
      arrow-up
      8
      ·
      1 year ago

      While paperless processing is indeed quite intensive, it’s not like this is a latency-sensitive task. If it takes 5m to OCR a scan, so be it. That doesn’t make it unusably slow.

      • drugo@lemmy.drugo.me
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        What I meant is that overloading the CPU on a Raspberry running pi-hole will make the whole network misbehave and timeout, until DNS requests are able to be serviced again. But since they’re not doing that it should be fine :)

        • Lennard@lemmy.dbzer0.comOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          It’s there any way around this? I don’t want my smart home applications to run sluggish. They need to have priority.

            • Atemu
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Scheduling priority on Linux is borderline broken. Nice doesn’t even do anything noticeable on modern systems.

          • drugo@lemmy.drugo.me
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I would say not in a way that makes sense, there may be hacky workarounds like setting nice priorities or messing around with scheduling, but there’s no way around hardware limitations. The Pi’s CPU, RAM, and IO bandwidth are what they are, and you need overhead to guarantee “snappiness”

  • TCB13@lemmy.world
    link
    fedilink
    English
    arrow-up
    11
    arrow-down
    1
    ·
    1 year ago

    Nextcloud will be slow. To be realistic is it always slow in all hardware.

    • Molecular0079@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      It will be slow on the Pi, but it’s pretty darned fast on my new DIY NAS with a Ryzen 5600x so it does scale with better hardware.

        • Molecular0079@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Eh, every page has a bunch of Javascript errors and logs. That’s normal. So far it hasn’t impacted my usage at all and I’ve got 450GB gigabytes stored in a Nextcloud instance that’s lasted 4-years and migrated between 3 separate machines.

          • TCB13@lemmy.world
            link
            fedilink
            English
            arrow-up
            4
            arrow-down
            2
            ·
            1 year ago

            That’s normal

            Ahaha. The current state of software development and what people accept as normal is just mind-boggling. And no, it’s not “normal” nor “ok”, it slows down things and the UI sometimes crashes with more data.

            • Molecular0079@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              I take it you’ve never seen the amount of crap that gets put into journalctl then. I’ve never encountered a Nextcloud crash with the amount of data I have. It could have been a deployment issue on your end. My docker containers have been running fine.

              • TCB13@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                I tired bare metal and docker, it’s shit and I’m not the only one complaining so I’ll assume you’ve been lucky so far. Either way you can’t deny that the UI is a piece of crap and my “personal favorite” is the webmail UI that can’t even WYSIWYG properly.

                • Molecular0079@lemmy.world
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  1 year ago

                  It’s been 4 years, that’s one hell of a lucky streak. Eh, the UI is fine, way better than syncthing’s anyways and its client has working partial sync. I get that you have hate for Nextcloud, but personally I am not about the mess of disparate tools in your post just to get something equivalent to Nextcloud tbh. To each their own.

  • rambos@lemm.ee
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Ive been running HA (in docker container) and NextCloud on rpi4 4gb and it was working fine, but after server upgrade (diy pc) nextcloud became much more snappy (wasnt my reason to upgrade). Not sure about paperless, but I had many more lightweight services along with HA and NC. Im also not heavy HA or NC user, just my 0.02

      • rambos@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I would, but you have to decide on your own. I dont know can you afford HA downtime, how much experience you have and how much time you want to burn. I found docker frustrating to learn but super rewarding. Keep in mind Im still new.

        Its best to backup and/or get spare SD card to learn how to setup everything. Be prepared for begginer mistakes, but once you get familiar a bit it will be much easier.

        If you can manage docker containers in HAOS just try it. I have 0 experience with HAOS so cant help much, but I saw Portainer is available as HA addon. You should be able to manage all docker containers with simple Portainer GUI.

        I had dietpi or raspbian OS with docker, docker-compose and Portainer installed. Then I started many containers (including HA) using Portainer. If you go this path you will lose HA addons. I believe most addons can be replaced with docker containers from hub.docker.com, but Im not sure about that. Ive just seen some HAOS vs Docker posts

        Gl

    • Strit@lemmy.linuxuserspace.show
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Same here. My old Pi 4, was running HA, Nextcloud, Ghost blog, websites, Jellyfin and a couple of other small things. It did it fine, but when I upgraded to the Odroid H3 it all became so much faster and snappier.

  • Decronym@lemmy.decronym.xyzB
    link
    fedilink
    English
    arrow-up
    3
    arrow-down
    1
    ·
    edit-2
    1 year ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    DNS Domain Name Service/System
    HA Home Assistant automation software
    ~ High Availability
    NAS Network-Attached Storage
    NUC Next Unit of Computing brand of Intel small computers

    4 acronyms in this thread; the most compressed thread commented on today has 11 acronyms.

    [Thread #94 for this sub, first seen 31st Aug 2023, 10:15] [FAQ] [Full list] [Contact] [Source code]