The problem is already solved (At least I found the bug and a temporary solution) At the beginning of the post there is a link to the bug report.

I lost 3 days of my life + now I need reinstall everything 🥲

I found the problem! It was actually the kernel, just both the latest and the lts versions released after 11th of August don’t work. So for now I need to stick to the versions from 11th. Thank you very much for the help!

Edit: this is the bug

This is the log https://ufile.io/p5wj1hu0

I’m not sure if this is relevant, but I added pci=nommconf to the kernel parameters as I had errors similar to the one in this topic, otherwise the log was over 40 000 lines long.

Edit: I’m not sure if this is exactly a kernel problem, as I get the same error when booting with the LTS kernel, which is older than the one installed with the offline installer.

This didn’t help :/

Thank you for your time and patience!

Could you please take a look at the comments from abrer and Illecors, I have shares a lot of info there.

No, I have never used encryption

I got another errors now

https://postimg.cc/Z9dyg1Vn

It got stuck at the same spot.

dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: i18n ***
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: Skipping udev rule: 70-persistent-net.rules
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: shutdown ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: Mode:                     real
dracut: Method:                   memcmp
dracut: Files:                    780
dracut: Linked:                   2 files
dracut: Compared:                 0 xattrs
dracut: Compared:                 38 files
dracut: Saved:                    356.65 KiB
dracut: Duration:                 0.010006 seconds
dracut: *** Hardlinking files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Store current command line parameters ***
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Creating image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd' ***
dracut: *** Creating initramfs image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd' done ***
(4/5) Check if user should be informed about rebooting after certain system package upgrades.
(5/5) Checking which packages need to be rebuilt

I updated only the kernel and I got the following:

:: kernel-install installing kernel 6.4.12-arch1-1
dracut: Executing: /usr/bin/dracut --no-hostonly --force /efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd-fallback 6.4.12-arch1-1
dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
dracut: dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'fcoemon' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'fcoeadm' could not be found!
dracut: dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
dracut: dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
dracut: dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'nbd' depends on 'network', which can't be installed
dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: modsign ***
dracut: *** Including module: i18n ***
dracut: *** Including module: btrfs ***
dracut: *** Including module: crypt ***
dracut: *** Including module: dm ***
dracut: Skipping udev rule: 64-device-mapper.rules
dracut: Skipping udev rule: 60-persistent-storage-dm.rules
dracut: Skipping udev rule: 55-dm.rules
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: lvm ***
dracut: Skipping udev rule: 64-device-mapper.rules
dracut: Skipping udev rule: 56-lvm.rules
dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
dracut: *** Including module: mdraid ***
dracut: Skipping udev rule: 64-md-raid.rules
dracut: *** Including module: nvdimm ***
dracut: *** Including module: qemu ***
dracut: *** Including module: qemu-net ***
dracut: *** Including module: lunmask ***
dracut: *** Including module: resume ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: *** Including module: virtiofs ***
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: shutdown ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: Mode:                     real
dracut: Method:                   memcmp
dracut: Files:                    1987
dracut: Linked:                   8 files
dracut: Compared:                 0 xattrs
dracut: Compared:                 449 files
dracut: Saved:                    1.42 MiB
dracut: Duration:                 0.022128 seconds
dracut: *** Hardlinking files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Constructing AuthenticAMD.bin ***
dracut: *** Store current command line parameters ***
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Creating image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd-fallback' ***
dracut: *** Creating initramfs image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd-fallback' done ***
dracut: Executing: /usr/bin/dracut --hostonly --no-hostonly-cmdline -f /efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd 6.4.12-arch1-1

(Continues in the second comment)

they are under /02ef85f9edc146d598502c1b296ff64a/6.4.12-arch1-1/, but yes.

EndeavourOS is using dracut by default.

Edit: we tried rebuilding initramfs before, but it didn’t help

I have already wiped everything, so no logs… The only way to have it booting is to install EndeavourOS using the offline installer, which is using kernel 6.4.8. There is an option to install the LTS kernel alongside. So the system is booting with 6.4.8, but after updating, neither the new 6.4.12, or the LTS, which is 6.2, doesn’t boot. I haven’t tried booting with the LTS kernel before updating, to see if the same kernel is working before and after or not. I will try to reinstall it using the offline installer and then try to gather some logs after updating.

I found it!

[liveuser@eos-2023.08.05 ~]$ cat /mnt/efi/loader/entries/02ef85f9edc146d598502c1b296ff64a-6.4.12-arch1-1.conf 
# Boot Loader Specification type#1 entry
# File created by /etc/kernel/install.d/90-loaderentry.install (systemd 254.1-1-arch)
title      EndeavourOS
version    6.4.12-arch1-1
machine-id 02ef85f9edc146d598502c1b296ff64a
sort-key   endeavouros-6.4.12-arch1-1
options    nvme_load=YES nowatchdog rw root=UUID=9ae3c50f-be08-4594-ac30-2d094375868d systemd.machine_id=02ef85f9edc146d598502c1b296ff64a
linux      /02ef85f9edc146d598502c1b296ff64a/6.4.12-arch1-1/linux
initrd     /02ef85f9edc146d598502c1b296ff64a/6.4.12-arch1-1/initrd

https://postimg.cc/cgvdVrgR

I’m on systemd-boot. Where isn’t a directory loaders under loader, but I found the parameters under /etc/kernel/cmdline:

nvme_load=YES nowatchdog rw root=UUID=9ae3c50f-be08-4594-ac30-2d094375868d

[root@EndeavourOS /]# blkid
/dev/nvme0n1p1: UUID="6903-7FA3" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="86a0a714-815f-45db-ad0e-9eba16861903"
/dev/nvme0n1p2: LABEL="endeavouros" UUID="9ae3c50f-be08-4594-ac30-2d094375868d" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="endeavouros" PARTUUID="9b52162c-a4bf-4e5e-8096-bb7f144c481a"
/dev/loop0: BLOCK_SIZE="1048576" TYPE="squashfs"
/dev/sda2: SEC_TYPE="msdos" LABEL_FATBOOT="ARCHISO_EFI" LABEL="ARCHISO_EFI" UUID="6121-B369" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="1bdb3cc0-02"
/dev/sda1: BLOCK_SIZE="2048" UUID="2023-08-05-13-57-43-00" LABEL="EOS_202308" TYPE="iso9660" PARTUUID="1bdb3cc0-01"
[root@EndeavourOS /]# sudo cat /etc/fstab 
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
#                      
UUID=6903-7FA3                            /efi           vfat    defaults,noatime 0 2
UUID=9ae3c50f-be08-4594-ac30-2d094375868d /              ext4    defaults,noatime 0 1
tmpfs                                     /tmp           tmpfs   defaults,noatime,mode=1777 0

That makes sense, thanks!