All blades have the same size, 36cm long, aerodynamically well shaped. But. The first weighs 120g, the second 125g… And the third one 210g… This is a small problem. So what are my options now? Making a new blade would be the last option, but do I have any other options?

  • Uresname@lemmy.dbzer0.com
    link
    fedilink
    arrow-up
    8
    ·
    1 year ago

    I have no experience here but could you add weight to the others to make them heavier? Maybe tape strips that will have minimal aerodynamic impact? If not, maybe sand or shave down the heavier ones until they match?

  • 7eter@feddit.de
    link
    fedilink
    arrow-up
    7
    ·
    1 year ago

    I don’t believe that the reason for this is density changes of the wood but more likely imprecise dimensions. I can’t really tell from the picture, but the lower blade seems slightly larger or maybe even thicker.
    For example, the section marked in green at the heavy blade seems to be bigger than the blue marked section of the light blade. So I would suggest sand paper.

  • Bob Robertson IX @discuss.tchncs.de
    link
    fedilink
    arrow-up
    7
    ·
    1 year ago

    Drill a hole in the heaviest one then use putty to cover the hole back up. For the one that’s just slightly heavier you could probably remove enough with sandpaper to even them out.

  • thisNotMyName@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    Take some sand paper and grind a little off of the heavier ones? (No idea if that would ruin your aerodynamics too much)

  • popcap200
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Can you drill from the faces closest to the center of rotation on the heavy ones?