Just wondering everyone’s chain maintenance practices.

  • birbboidaseed@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    I just wiped down the chain with a cloth and lube with a 4 drops of 90w gear oil each link every 500kms. Since it’s been cleaned so frequently and not dripping with oil, it doesn’t get dirty enough for kerosene.

  • KingJacobo@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    When I had a chain drive, every 500mi is for street riding. Around 300mi when I took my dual sport down dusty trails.

  • br1ck@lemm.ee
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    1 year ago

    I use the trip B counter to know when I’m over the 500km. Usually around 800 it gets very noisy and harder to manoeuvre it by hand.

    If chain has sand or dirt I use the Honda chain cleaner, otherwise just put more Honda chain lube on every roller on the inside of the chain( on the bottom part of chain lube the roller from the top). You don’t need much lube, specially if you put it on the inside, with the centrifugal force it will spread it around.

    Afterwards rotate the wheel couple of times with a paper towel resting against the outside of the chain to remove some of the old lube.

    Love the feeling of pushing by hand a newly chained bike and the silence when coasting

  • pepsison52895@lemmy.one
    link
    fedilink
    arrow-up
    0
    ·
    1 year ago

    For day-to-day riding, I usually do it every 3 fuel fills or so. That’s right around the 5-600 mile internal that most manuals state. For long road trips, I’ll do it every night.

  • Kecessa@sh.itjust.works
    link
    fedilink
    arrow-up
    0
    arrow-down
    1
    ·
    1 year ago

    Cleanup with wd-40 and lube with gear oil every time I think about it, usually when it starts getting noisy when coasting.