I have a coworker who’s looking to sell his car, a 1989 Toyota Corolla. I know the basics of looking after a car, but a car that old is almost foreign to me, because I’m from a state where cars rust out.

I figure Toyotas are pretty reliable and so is the 4AG engine, but I don’t want to end up with another money pit. What should I look out for, or should I just avoid it altogether?

  • Hazdaz@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    arrow-down
    1
    ·
    1 year ago

    Here’s the problem… cars need maintenance. Parts wear out, they need replacing. Doesn’t matter what make or model they are, things will go wrong. Plastics get brittle, rubber deteriorates and metal parts like bearings wear out. That’s the nature of the beast and don’t let anyone convince you otherwise.

    The problem with such an old car is that you can’t just run into Autozone and find a new gasket or bushing or other parts. Generic stuff like bulbs and oil is of course available, but you will be waiting for things to get shipped to you for a lot of parts.

    If yiu had some other form of transportation and your commute was short, then by all means buy it as long as you understand part availability could be a little delayed versus a more modern car.

    Also keep in mind that 80s and 90s era cars are hot right now due to nostalgia so the resale value for them has gone up considerably in recent years. If you’re into that era car and yiu don’t mind wrenching yourself, consider the car, but you will pay a premium.

    • RightHandOfIkaros@lemmy.worldM
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      The problem with such an old car is that you can’t just run into Autozone and find a new gasket or bushing or other parts.

      This isnt exactly true. Its highly dependant on the M/M.

      For example, I can walk into my local O’reilly (AutoZones in my area have consistently got the wrong part every time so I avoid them now) and get pretty much any mechanical part I need for my 1968 Ford Galaxie 500. And if not that day, then by the next day. This is because Ford shared a lot of mechanical parts between many models for many years, so things like drums and shoes, starters, wheel cylinders, engine parts including gaskets, suspension bushings, etc. are all pretty easy to find and buy. They’re also incredibly cheap. I bought a wheel cylinder for $15 USD, and a brand new starter only set me back $45 USD. This is in California, which is pretty notorious for high cost items. For any part that my local stores don’t have, RockAuto is guaranteed to have it. They even happened to have the rare factory style air-conditioning vacuum valve tree for directing coolant into the heater core I need to get heat in my car for just $20 USD (which I promptly bought 2).

      For non-mechanical parts like interior trim, mirrors, etc, that stuff is all really hard to find. I have had to custom order some of these parts myself, especially since the 1968 Galaxie was its own model, the 1967 and 1969 models had different designs that use incompatible parts.

      By comparison to modern cars, I found myself getting parts actually faster than the modern cars I repair for a living. Seems like every new car part is SOP these days, 1 to 2 weeks out.

      • Hazdaz@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        I have a 1964 Buick Riviera and for mechanical parts, most things can be had in a few days, but I’m not finding them at the actual store on the same day. Not anythihg but the super generic stuff, at least. I’m not saying they are months out to get - a couple of days to ship - but OP is asking about making this his daily driver. That’s far different than a fun project car. If you’re driving 30+ miles a day and you don’t have a backup way to get around, I would be very hesitant to get this car for that purpose.

      • Professorozone@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        In this case it is true. Toyota does not support their cars for very long. I have a 1988 Corolla gt-s, a 1999 Solara V6, and a 2003 MR2 Spyder. Many parts simply are not available. It’s sad because, I love these old cars, but I find myself sometimes making my own parts or retrofitting other parts.

        They are also in constant need of attention. Most of it doesn’t keep them off of the road, but still they need maintenance. Consequently, I bought a newer car as my dependable transportation when more than one is broken at a time.