The host is the most important thing here, since I am finding it hard to get a full replacement for the screen. If someone has an answer for a fix, that would be awesome.

  • bloodfart
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 hour ago

    Replace the flex cable.

    While you’re in there pull the panel assembly out and take pictures of the model numbers.

    Use aliexpress to find a panel when the flex cable replacement doesn’t fix it.

  • KrapKake@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    12 hours ago

    Looks pretty toast to me but I guess you could try opening it up if you haven’t already and making sure the cable is plugged in all the way on both ends and not damaged. If fiddling with that has any effect at all then try replacing the cable.

    Someone I know had a laptop that would pull it’s cable out from the motherboard over time just by opening/closing the lid! (HP iirc)

    • J'Pol @lemmy.sdf.orgOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      12 hours ago

      This is a weird problem. I’m going to open it up this weekend. For about a year it has seemingly randomly done this. Opening and closing the lid doesn’t seem to be the problem because I left it open for a couple of years with no issue. I posted here in hopes that there might have been a driver issue along the way. I’ll poke around and see if I can see a hardware issue.

      • rowinxavier@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        12 hours ago

        To be clear, if it he happened on and off that eliminates a bunch of potential causes. It is entirely possible this is just a loose ribbon cable or similar, though it could be a different kind of intermittent. Does it happen on an external monitor? What about a live USB? Both of those will isolate whether it is hardware or software to some degree.

        • J'Pol @lemmy.sdf.orgOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          12 hours ago

          No problems on external monitor. Only the built-in has issues. I would like to be able to take it places. The issue is so intermittent that I can’t chase it down to one cause. I haven’t tried a live usb yet - I will do so as soon as I can.

  • Septimaeus@infosec.pub
    link
    fedilink
    English
    arrow-up
    3
    ·
    12 hours ago

    But in seriousness, as a rule it’s not possible to unfuck a display matrix, only replace. The easiest temp solution is an external. The easiest long term solution, if the manufacturer is no longer selling the part, is saving alerts for parts-only listings of that laptop on sites like eBay.

    • J'Pol @lemmy.sdf.orgOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      12 hours ago

      Yeah. I have an external. I was just hoping that this community might be able to find something I couldn’t. Best I have is that screenshot with the model number.

      • shalafi@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        4 hours ago

        You’ve already got excellent advice, but I’ll add this to maybe save you some money.

        Since you’re replacing it anyway, go ahead and yank it and get the part number off the back. As Septimaeus said, it’s likely used on several laptop models. Vendors always charge more when you’re searching for the laptop model. Search instead for the monitor model. Also, try eBay and other vendors. You might be surprised at the cost differences after a little shopping.

        • J'Pol @lemmy.sdf.orgOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          11 hours ago

          Thanks a lot for the link! I was browsing Amazon and they all had questionable specs.

          • Septimaeus@infosec.pub
            link
            fedilink
            English
            arrow-up
            4
            ·
            edit-2
            10 hours ago

            No worries. In case this is your first display replacement, few quick tips…

            1. Helps to skim video teardowns like this
            2. Take photos of internals of electronics when you open them up so you can reference them later after reassembly.
            3. Keep track of screws. Trick: unscrew but leave them loose in the holes of the case tray with pieces of tape over each of them. Then you can remove tray without concern.
            4. Bare display edges are especially fragile and often have coatings that scratch easy. Trick: leave protective film on, just put a few pieces of folded tape on edges so you can pull off after install.
            5. Your display connects to the mainboard with two connectors wrapped in gaphers tape the right side: right side of laptop mainboard
            6. Display ribbon terminal (tall one far left) is more fragile than camera/lid sensors (wide one far right). Trick: use guitar pick or credit card to lift clamp right to left, never knife
            7. Ribbon itself often has physical tabs or printed white/color blocks indicating seat depth. This makes it far easier to verify its secure before closing case.

            Good luck!

    • J'Pol @lemmy.sdf.orgOP
      link
      fedilink
      English
      arrow-up
      3
      ·
      12 hours ago

      I’d prefer a large series of interpolating lines at a specific refresh rate. I posted here because I thought there would be a high percentage of people that could maybe diagnose the issue. I don’t think there is something like /c/laptopgore here.