I have been a hobby woodworker for about a decade now, and this thing is by far the most fun I have in the shop. Unlike building a big piece of furniture that can take me weeks, I usually can come up with an idea and be assembling things within a few hours.

I am posting this for people wondering what you get when you order a $350 CO2 laser cutter off eBay. I purchased this 2 years ago and have had no issues. All of my woodworking project posts that involve a laser cutter are using this machine, although I have upgraded/modded the machine since purchase

K40 is name for this generic Chinese laser cutter platform. There are lots of sellers under lots of names, but they are all basically the same thing.

There are some American resellers, like Omtech that you can buys these machines from and they will offer upgrades and tech support.

Here was the original posting, doesn’t look like this seller is around anymore

Shipped from a warehouse in California so I didn’t have to do any import tax stuff

Double boxed with unformed styrofoam

Inside stuffed with the “accessories” which were mostly tossed in the garbage, and some loose foam.

Cutting bed and fume extractor both of which I would later remove as part of the modifications

They had the water cooling tubes routing out through the exhaust fan for shipping, easy process of rerouting them during the initial setup

Lots of info online about ensuring proper grounding with these. I followed the guides around sanding off the paint to ensure good contact with the metal from the case. I think this is probably the only modI did before the first cut

This splice on the high voltage line seemed pretty ghetto to me, but the internet “experts” on the K40 forums assured me this was fine/normal.

Stock fume extractor fan and water cooling tubes. I added a water movement indicator and removed the fan and added a inline exhaust as part of later mods.

Mirrors were hot glued in place, but actually alignment was perfect right out of the box for me and this thing cut without issue on the first try. Over the years of mods and banging it around I have removed the glue and fine tuned but the tube and mirrors have held up well.

Here it is today in all it’s glory.

Cross posted from my post here https://lemm.ee/c/lasercutting

  • Hypnotized@lemm.eeOP
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    1 year ago

    I started with K40 Whisperer, then after about a year I swapped out the control board and use Lightburn now.

    I use inkcape usually for the initial designs.