I’m trying to start out self-hosting and was looking for some good servers. I have a budget of ~100 USD and am in the US. I was initially going to get some type of raspberry pi but they seem to always be sold out here

  • rs5th@lemmy.scottlabs.io
    link
    fedilink
    English
    arrow-up
    18
    ·
    1 year ago

    I’d go with something like this Lenovo M900 for $80-$90 used. Sometimes you’ll get lucky and find one with a single 8GB stick, then you can get another for ~$20 and you’ve got a quad core x84-64 machine with 16GB of RAM for right around $100.

    The downside would be power consumption compared to a Pi if you’re trying to fit in a severely power-constrained setup, but the M900 will draw around 11-13W idle and 55W under higher load. so it’s not bad my any means.

    • passport@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      7
      ·
      1 year ago

      ^ Lenovo tiny thinkcenters are the best thing ever. Heck, I use the older haswell-era M73s that you can get for $30-40 on ebay and they’re amazing. Only drawback is no m.2 and no PCIe expandability but if you’re on a budget and want a starter homelab you can literally cluster 3 of these things for ~$100

    • spectre@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      is there a good way to set up storage for a mini pc for something like plex or jellyfin?

      • rs5th@lemmy.scottlabs.io
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I believe the M900 has both a SATA port and a M.2 slot, so some options for internal storage.

        You could also plug in a big spinning drive via USB 3. USB 3 can move data faster than a magnetic drive can pull it off the platters.