I do lots of testing of apps in real phones, not emulators.

The thing is that the phones must be connected to the PC all day. Because of this, phones battery get swollen and I have to buy phones regularly.

Do you know any android phone which can be connected and on all day all week without getting swollen after a time?

Must be real phones, emulators are descarted.

  • @Asudox@lemmy.world
    link
    fedilink
    English
    173 months ago

    Get a fairphone and remove the battery. As long as the phone is connected to the PC and is getting electricity, it will work without a battery like PCs.

  • lemmyvore
    link
    fedilink
    English
    113 months ago

    Some phones have a setting that limits charge to 80% or another non-100% number. Maybe that would help?

    I know several manufacturers that include some form of this feature, Google Samsung, Sony. On Sony it’s called Battery Care.

  • @cmnybo@discuss.tchncs.de
    link
    fedilink
    English
    63 months ago

    Samsung phones have a battery protection mode that will stop charging at 85% when enabled. Any lithium pouch cells will swell up if they are kept on a charger at 100% continuously.

  • Annoyed_🦀 🏅
    link
    fedilink
    English
    43 months ago

    Phone battery can be changed though, could save you a lot of money that way. Or use fairphone, it can be easily swapped in second.

  • @Antergo
    link
    English
    43 months ago

    You can use wireless ADB, or try to set the battery limit to 80% and only set charging to only start below 30%. Wireless ADB settings can be found in the developer options. battery options don’t always include the option to require battery level to drop below X% before charging starts again, and if it is, it is usually branded as battery saver feature or smth like that.

  • Mac
    link
    fedilink
    English
    23 months ago

    Not an android user or anything, but I would assume there are apps to disable charging the battery. Or apps to allow you to use a phone without the battery.

    If you can disable charging then I’d discharge to 20% or so then disable charging and connect it. 20% should be a fairly safe storage capacity for the battery. Maybe 30-40 to be on a bit safer side.

    Then you could just go through a battery cycle once a month or so to ensure different cells get used. I’m sure you could figure out an automation for that mr tester man.

  • Martin
    link
    fedilink
    English
    12 months ago

    Could you use a data only USB cable and only charge when needed?