I’ve got ~10 full sheets of .5" construction grade plywood taking up space in my garage. I’ve already built a climbing wall for the kids and a new scrap bin.

How else could I put it to use?

  • BoxesOfPepe@lemmy.one
    link
    fedilink
    arrow-up
    5
    ·
    edit-2
    1 year ago

    Jigs and more jigs. Replace any older/worn out ply in other projects (bench tops, shelving, …jigs)?

    • meshuggahn@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      The problem is that the ply is pretty junky. Tons of voids and such. Not sure it would do well for most jigs.

  • karpintero@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    I just built a small shed using 7/16" OSB for all the wall and roof sheathing so 1/2" ply could work well for that too.

    Some other things I can think of are a shop cart and assembly table, both would be nice to have. Been meaning to make a cart to wheel around my dust extractor + dust deputy cyclone.

    Jigs are always handy, but you may prefer to build those out of 3/4 Baltic birch. The ones I reach for often are the crosscut sled, shooting board, bench hook, tenoning jig. Sacrificial fence and L-fence are also great additions. Also, a mortising jig for plunge router if you do a lot of mortise & tenon.

    Other miscellaneous storage like cordless drill holders, charging stations, chest of drawers for hardware are also worth making to help give things that tend to wander a home.

    • meshuggahn@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Yeah I’ve got better quality 3/4 ply for most jigs. I might have to remake my miter saw station so that could use some of it.

    • meshuggahn@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Ah good reminder. I have a good bit of attic space that this just insulation. With some supports I could lay this down and gain a lot of storage space.

  • DavidP@toast.ooo
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    That is a lot of plywood! I’d consider selling most of it just to get the space back.

  • snota@sh.itjust.works
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    I made a subwoofer with some leftover ply I had. Added shelving to a fitted wardrobe. Carcassing for a kitchen or bathroom units. Experiment with making curves with partial cuts and make a round box If you are in to climbing as well you could make a moon wall although that takes quite a bit of extra investment.

  • neal@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    I’ll go a different direction than some of these other comments because it’s a project I’m planning on building soon. If you have cats build some homemade cat towers. You can cover with carpet/fabric to make them easier for cats to climb and hide the imperfections.