• Sasquatch
    link
    fedilink
    arrow-up
    1
    ·
    edit-2
    5 months ago

    One of the biggest challenges with mass EV battery production is making sure performance stays somewhat flat across the entire market you’re selling them in. Typically, LiFePo batteries perform better at higher temperatures than other chemistries, at the expense of low-temperature performance.

    This works well, as long as

    1. These batteries are only in vehicles sold in warmer climates
    2. Customers never drive these vehicles into cold climates.

    #1 is much easier to enforce as a manufacturer, but customers will be pissed if they move north, and their vehicle has worse range and power.

    Li-ion has a flatter temp/performance curve, so it’s more suited to geographically larger markets like the US, where regulations require a single range number for the entire country, despite the significant climate variance

    • Chriswild@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      5 months ago

      This can be mitigated greatly with heat pumps and insulation around the cells.

      But the model 3 standard range has LiFePo cells and it’s fine in cold climates. On top of this it doesn’t have to heat the battery to fast charge.

      In the cold the biggest range killer is heating the cabin not the cells. Optimal cell temp is 0-45 and this can be taken off the motors if the car is pushing that range with assistance from a heat pump.

      Car makers have sold trucks in north America that need block heaters to start with no block heaters for ages. I think they just want as big a worthless range number as possible.