A few weeks ago I posted here asking about buying a first hand plane and if it was worth dropping ~$400 on a Lie-Nielsen one.

After all of your comments about getting an old Stanley I kept an eye on Craigslist, Ebay, and FB Marketplace for a little bit and ended up finding someone selling a collection of pre-WWII Stanley planes about an hour north of me. Including, specifically, a 4-1/2 and a 5-1/2 which was exactly what I wanted.

Knowing that the 1/2 sizes were less common than the round numbers and since the guy was local I jumped on it and ended up buying both for $40/each. The linked to album is the before and after of the 5-1/2 after cleaning it up. It’s all tuned up and works beautifully. All in, I’m at $80 for two planes, $15 for cleaning materials, and $35 for a whetstone sharpening kit; way cheaper than a new Lie-Nielsen and I got two planes! Thanks everyone!

https://imgur.com/a/AoABAsI

  • UsernameLost
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    When I first started woodworking, I was in an uninsulated shed in Alaska and didn’t bother with anything more than a crappy dust mask. After my first project, I was coughing dust and blowing sawdust out of my nose for a few days. Fuuuuuuuck that.

    Since then, I’ve moved a few times, upgraded my dust collection setup, and I still just wear a respirator with P100 cartridges (unless I’m finishing, in which case I’ll use the VOC cartridges).

    Even with proper dust collection, I’d rather just wear PPE. At this point, I view having good dust collection as more of a time saver for cleaning than actual protection.

    • jadero@lemmy.ca
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Even with proper dust collection, I’d rather just wear PPE. At this point, I view having good dust collection as more of a time saver for cleaning than actual protection.

      That’s pretty close to my own view. I’ve moved the tough to manage stuff outside and leave the easy to manage stuff inside. I still wear PPE in both cases, because that is the simplest, cheapest, and, most importantly, reliably does the job.

      Some of my equipment pretty much has to be outside anyway, because my shop is just too small for both boat building and a bunch of dust makers.

      I’m also doing more of my work with just hand tools. I find it pleasurable and being just a hobby, it’s not like there are any time pressures. And now I’m retired, so I’ve got even more time.