RAID Calculator | Synology Inc.
www.synology.com
Use this interactive tool to estimate the storage space of your Synology NAS when paired with different size hard drives and RAID levels.

Not sure the best place to ask this.

I have a DS420J 4 bay NAS, primarily used for my Plex server and data backups (among a few other things). I currently have 8x6x6 TB Iron Wolf NAS drives in a single volume with SRH and an extra 1 TB SSD JBOD. I have my Plex app and metadata stored on the SSD due to the increased performance I have seen vs. having it installed on the large pool (7200 RPM cap). I am sitting at about 85% used storage of my available 10.8 TB on the primary volume. As such, I am pre-planning my next storage upgrade and am curious about my options while staying with the current hardware. The future plan will be a NAS upgrade, but this little beast has been chugging along so perfectly I want to push it as far as I can.

If I was to remove the 1 TB drive and replace it with another 8 TB Iron Wolf, I would jump to 20 TB available storage. https://www.synology.com/en-us/support/RAID_calculator?hdds=6 TB|6 TB|8 TB|8 TB This increase would last me for quite some time ahead of a full NAS upgrade with more bays. In order to do this, I would obviously need to remove the 1 TB SSD to be replaced by the new drive. I have na external enclosure for this drive that can connect over USB to the NAS.

My question: I am finding somewhat conflicting information on how external drives are intended to be used/what their capabilities are when connected to the USB 3.2 port. It seems the intended functionality for backups (which makes sense). Am I able to utilize a USB connected drive and have it function in a similar manner to it being internal? Are you able to install apps from the Package Center to an external drive? Create volumes? I assume there will be some performance degradation due to the translation from SATA to USB, then back to SATA, but I anticipate the SSD will still perform better than adding the app back to the main pool. I just don’t know if I am potentially missing something with my evaluation. Those that have more experience with USB connected drive with their NAS, I would love to hear your experience. Thanks!

  • Fribbtastic@lemmy.worldEnglish
    1·
    2 years ago

    Am I able to utilize a USB connected drive and have it function in a similar manner to it being internal?

    technically speaking, there isn’t much difference between internal and external devices they are both accessible from the operating system BUT operating systems could limit their useability. For example, I noticed that I cannot install Windows on an external USB device even if that device is an NVME SSD in a USB enclosure.

    This also includes if your Synology actually allows an external device to be used for application data. If you use Docker you could map any volume to the internal container configuration (but from what I can find the DS420J doesn’t support docker?!)

    But speed is another thing. Internal connections are usually faster than external devices. This, however, might not make much of a difference because the reason you put the Plex configuration an metadata on an SSD is not necessarily because of how fast it is but rather because of the increases access time of files. There is just not a read/write arm that has to travel back and forth on a disk to read your data.

    Are you able to install apps from the Package Center to an external drive? Create volumes?

    I don’t use Synology drives so all I can do is google and I found this

    Those that have more experience with USB connected drive with their NAS

    As with most external devices, keep in mind that they have features to conserve power so they can power down or go idle at some point. This might not be much of an issue with Plex since log files are written constantly. But this is also the next thing, that external device would be online all the time your server would be online, adding to your overall power consumption and might not even be designed to run all the time.

    Personally, I would rather have your media files stored on the external device instead of application data and configuration. I would have suggested to replace a drive with a larger one (one 6TB drive with a 16TB) but this doesn’t seem to give you that much storage space in comparison than adding a new drive…